Perth's dry season brings more than heat. Fine sand from the coastal plain, limestone dust from construction and quarrying, and occasional ash from bushfires can all find their way into your workspace. Effective dust control in office buildings Perth facility managers rely on is not one big fix. It is a set of small, consistent habits covering filtration, entry points, cleaning schedules and response plans.
This guide covers eight practical steps, with a focus on HVAC filters, entry matting and cleaning frequency during dust events. Treat it as a starting framework and adjust it to your building, your tenancy and your risk profile.
1. Understand What You Are Actually Dealing With
Not all dust behaves the same way, so it helps to know the three common sources in Perth.
- Summer sand: Much of Perth sits on sandy soils. Dry, windy days lift grains and fine particles, which are carried in on shoes, clothing and through doors and vents.
- Limestone dust: Limestone is widely used in the region's construction and landscaping. Nearby building sites, roadworks and limestone paths or driveways can produce pale, powdery dust that settles on dark surfaces and shows up quickly.
- Bushfire ash: During fire events, ash and smoke particles can travel well beyond the fire front. This material is very fine and tends to cling to surfaces and enter through ventilation.
Each type calls for slightly different tactics, but the core defence is the same: stop it entering, capture it in the air handling system, and remove it from surfaces before it builds up.
2. Review Your HVAC Filters Before Summer Starts
Your air handling system is both a pathway for dust and your best tool for capturing it. Before the dry season, check the following with your mechanical services contractor:
- Filter condition and type: Confirm what grade of filter your system uses and whether it is suitable for the loads your building now sees. Filter classifications are covered by Australian and international standards. The current Australian classification framework for general-ventilation air filters is the AS 16890 series, including AS 16890.1:2024, which classifies filters by particulate-matter efficiency (ePM). There is no single recommended grade for every commercial office in WA; have your HVAC contractor or mechanical engineer select the appropriate class and efficiency based on system design, outdoor-air conditions, required airflow and allowable pressure drop.
- Fit and seals: Gaps around filter frames let unfiltered air bypass the media, which defeats the purpose of upgrading.
- Replacement intervals: Follow the manufacturer's and your HVAC contractor's schedule, and bring checks forward after a heavy dust or smoke event.
- Outdoor air intakes: Make sure intake louvres and screens are clear of debris and accumulated sand.
Do not upgrade to a higher-grade filter without advice. Denser media can restrict airflow and strain fans if the system was not designed for it.
3. Build a Proper Entry Matting System
Most dust that ends up on your floors walks in through the front door. A good matting setup is one of the most cost-effective forms of dust control in office buildings Perth tenants can implement.
A layered approach works best:
- Outdoor scraper mat: A rugged, coarse surface that removes sand and grit from the soles of shoes.
- Indoor absorbent mat: A textile mat just inside the door that traps finer particles and moisture.
- Sufficient length: The more steps a person takes on matting, the more dust they leave behind. As an indicative design guide, around 3–5 metres may suit normal foot traffic, 6–7 metres busier entrances and 8–10 metres very high-footfall entrances. The appropriate length depends on traffic volume, entrance layout and matting system, and these figures are not a universal Australian requirement.
Check that mats lie flat and do not create trip hazards, and have them vacuumed or exchanged regularly. A saturated mat stops trapping dust and starts spreading it.
Do not overlook secondary entrances such as loading docks, car park lifts and stairwell doors. These often have no matting at all and become the main route for grit into upper floors.
4. Set Cleaning Frequency by Season, Not by Habit
A cleaning schedule built for winter will rarely keep up with a dry, windy February. Consider a seasonal approach to your regular office cleaning plan:
- Entry areas and hard floors: Increase vacuuming and damp mopping during the dry season. High-traffic lobbies may need attention daily or even more than once a day during a dust event.
- Carpeted areas: Vacuum with a commercial machine fitted with suitable filtration. Poor vacuum filtration can simply push fine dust back into the air.
- Horizontal surfaces: Desks, window sills, shelving and reception counters collect fine dust quickly. Wipe them with damp microfibre rather than dry dusters, which tend to scatter particles.
- Kitchens and shared areas: Dust mixes with food residue and moisture, so keep these on their regular schedule.
The right frequency depends on your location, floor plate, foot traffic and proximity to construction. Our office cleaning services in Perth can be tailored to these seasonal changes, and you can review common scheduling questions in our office cleaning FAQ.
5. Use the Right Cleaning Methods for Fine Dust
Technique matters as much as frequency. Fine limestone and ash particles can be pushed around rather than removed if the wrong tools are used.
- Vacuum before you wipe. Remove loose material first, then follow with a damp cloth.
- Use microfibre. It holds particles better than feather dusters or dry cloths.
- Work high to low. Clean vents, light fittings, and tops of cabinets first so dust falls onto surfaces you have yet to clean.
- Change cloths often. A dirty cloth redistributes dust.
- Avoid compressed air and dry sweeping indoors. Both send fine particles airborne.
Ask your cleaning provider about the equipment they use, including whether vacuums have sealed filtration suited to fine particles.
6. Don't Forget Windows, Frames and Door Tracks
Wind-blown sand and limestone dust accumulate on external glass, window tracks and door seals. When doors and windows are opened, or when seals have gaps, that material migrates indoors.
Scheduling regular window cleaning in Perth helps keep glass clear and lets you spot failing seals. Include tracks, frames and balcony or terrace doors in the scope, as they are easy to miss.
7. Prepare a Bushfire Ash and Smoke Response Plan
Ash events are less predictable than seasonal sand, so a simple plan helps you act quickly.
During the event:
- Keep external doors and windows closed where practical.
- Ask your HVAC contractor whether the system should run on recirculation or reduced outdoor air. Check current WorkSafe WA, WA Health and DFES advice and ask your HVAC contractor or mechanical engineer which operating mode is suitable for your building. WorkSafe WA advises closing windows and doors and using recycle mode on compatible air-conditioning systems during smoke events; DFES may advise turning air conditioners off depending on the incident. Follow current emergency instructions and do not assume every system can safely operate in recirculation mode.
- Follow official health and emergency advice for your area and notify staff as needed.
After the event:
- Inspect and, if necessary, replace HVAC filters early.
- Vacuum and damp-wipe surfaces rather than sweeping or blowing ash around.
- Clean entry areas, external walkways and window sills first, since ash accumulates there.
- Check outdoor air intakes and rooftop plant for build-up.
If you have concerns about indoor air quality after a significant event, consult a qualified occupational hygienist or relevant authority.
8. Audit, Record and Adjust
Dust control improves when you measure what is working. Walk the building after the first dust-heavy week of summer and note:
- Where dust is visibly settling (ledges, vents, dark furniture, server or comms rooms)
- Which mats are saturated or too short
- Which areas staff are complaining about
- Whether filters are loading faster than expected
Share this with your cleaning contractor and facility manager and update the scope accordingly. Many Perth buildings benefit from a joint review at the start and end of the dry season. If you are managing multiple sites, our contact team can help you discuss a plan that suits each location.
Quick Reference: Dry-Season Dust Checklist
- HVAC filters inspected and fitted correctly
- Outdoor air intakes clear
- Scraper and absorbent mats at every entry
- Entry floors cleaned more often
- Microfibre and filtered vacuums in use
- Windows, tracks and seals included in the schedule
- Ash and smoke response plan documented
- Seasonal review booked
FAQ
How often should an office be cleaned during dust events?
There is no single answer. Entry areas and hard floors usually need extra attention first, sometimes daily or more during heavy events, while other areas can often stay on the regular schedule. Your provider should assess foot traffic and exposure. There is no single cleaning frequency prescribed for every office under workplace health and safety requirements. Businesses must manage risks from airborne contaminants and ensure applicable workplace exposure standards are not exceeded. Any cleaning frequency specified in a lease or service contract is a separate contractual requirement. Check your site's risk assessment, applicable exposure standards and lease terms.
Will upgrading my HVAC filters solve the dust problem?
Not on its own. Better filtration helps, but only if the system is designed for it and the filters are properly fitted and replaced on time. Pair it with entry matting and consistent cleaning, and consult your HVAC contractor before changing filter grades.
Is limestone dust different from normal office dust?
It is typically finer and paler, so it shows quickly on dark surfaces and can be difficult to remove with dry dusting. Vacuum first, then use damp microfibre.
What is the best first step for dust control?
Start at the door. Effective entry matting stops a large share of grit before it spreads through the building. The amount removed varies with the matting design, length, coverage, foot traffic and maintenance, so avoid relying on a single percentage.

